Technical Data - ALPHA-TOOLS A-SD4,8 V Mode D'emploi D'origine

Anleitung_A_SD_4_8_SPK7:_
GBR
Important!
When using equipment, a few safety precautions must
be observed to avoid injuries and damage. Please read
the complete operating manual with due care. Keep this
manual in a safe place, so that the information is
available at all times. If you give the equipment to any
other person, give them these operating instructions as
well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.
1. Safety information
Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations and
instructions may result in an electric shock, fire and/or
serious injury.
Keep all safety regulations and instructions in a safe
place for future use.
2. Layout (Fig. 1)
1. Bit chuck
2. Changeover switch for forward/reverse / ON/OFF
switch
3. Charging connection
4. Battery charger
5. LED lamp
6. On/Off switch for LED lamp
7. Battery capacity indicator
3. Items supplied
Open the packaging and take out the equipment
with care.
Remove the packaging material and any packaging
and/or transportation braces (if available).
Check to see if all items are supplied.
Inspect the equipment and accessories for transport
damage.
If possible, please keep the packaging until the end
of the guarantee period.
10
17.08.2011 10:44 Uhr Seite 10
IMPORTANT
The equipment and packaging material are not toys.
Do not let children play with plastic bags, foils or
small parts. There is a danger of swallowing or
suffocating!
Cordless screwdriver
Battery charger
17 screwdriver bits
6 drill bits
1 bit holder
Original operating instructions
Safety instructions
4. Proper use
The cordless screwdriver is designed for tightening and
undoing screws.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been designed
for use in commercial, trade or industrial applications.
Our warranty will be voided if the machine is used in
commercial, trade or industrial businesses or for
equivalent purposes.

5. Technical data

Motor power supply:
Idling speed:
Clockwise/Counter-clockwise:
Charge voltage for rechargeable battery:
Charge current for rechargeable battery:
Battery charger supply voltage:
Charging time: approx. 3-5 hours
Battery type:
Weight:
4.8 V DC
200 min -1
Yes
6 V DC
300 mA
230 V ~ 50 Hz
Ni-Cd
0.3 kg