Iv.2. Setting Of The Device - Sewosy Care-in BOX Manuel D'utilisation

IV.2. Setting of the device

1 Once registered, the device is visible on the
main interface of the application
The status LED of the device indicates:
that the peripheral is logged and can be
accessed
that the peripheral is currently
logging on
that the peripheral is not or no longer
logged to the network and is not accessible
2
Click "
and settings of your device
3 On this interface you will find the information
and parameters of your device, which you can
change at any time
3.1 The "Remote Video" function is not used with our equipment
3.2 Setting of the remote unlock password
- Click "Unlock password setting"
- Enter the old then the new password
- Click "Setting"
When doing the first modification the
default password is "1234"
A confirmation message is displayed,
indicating that the password has been
changed successfully
" to access the information
Care-in BOX
Care-in BOX
Care-in BOX
Care-in BOX
Care-in BOX
Care-in BOX
28