Preparation Before Use; Preparation; General Control Function; Auto Power Off Function - Sharp RP-20 Mode D'emploi

Preparation before use

Make sure to unplug the AC power cord before making any connections.

■ Preparation

1
Connect to home entertainment receiver or other music system using an audio cable. Ensure that the red Audio cable is
inserted into the red jack and the white Audio cable is inserted into the white jack.
2
Plug the AC power cord of this unit into the AC outlet.
The safety marking
and statement label is
located at the bottom of
the unit.
Receiver, music
system, etc.
3
Remove the twist tie wire securing the tonearm.
Twist tie wire
General control
■ Function
Press the FUNCTION button repeatedly to select desired
function.
To line
output
jacks
To audio
input jacks
AUDIO
IN
CAUTION:
TO PREVENT ELECTRIC SHOCK,
MATCH WIDE BLADE OF PLUG TO
WIDE SLOT, FULLY INSERT.
AC outlet
(AC 120 V ~ 60 Hz)

■ Auto power off function

This unit will automatically power off after 15 minutes of
inactivity during :
PHONO / USB: In the stop mode.
E-7