Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1

SETTINGS MENU

In record mode, press the Up, Down, Left, Right and OK keys to access the settings menus.
Please note, there is no menu for the audio record mode.
Video and capture mode
1. In video record or capture mode, press the Menu key to display
the menu. Use the Up and Down keys to select the sub-menus, and
the OK or Right key to confirm.
2. Use the Up and Down keys to choose an item on the sub-menu,
and press OK to confirm.
3. Press the Menu key to close.
Video menu
• Movie size: select this option to choose file sizes – set small file sizes to record for longer.
Three sizes are available: 1280x720, 720x480 and 640x480.
• Frame rate: choose High or Low. Select Low to record for longer.
• Metering: select this option to change the brightness of the picture.
- Center: the exposure is calculated on the light in the middle of the image. Suitable for general use.
- Multi: exposure calculated on the average light.
- Spot: only the spot in the center of the LCD screen is metered for light.
• White balance: select this option to suit the light source – Auto, Daylight, Cloudy, Fluorescent
and Tungsten.
Capture menu
• Resolution: select this option to set the resolution of your photograph. Choose from (high to
low) 4000x3000, 2048x1536, 1280x960 or 640x480.
• Quality: select a lower image quality to reduce the file size and take more photographs.
Choose from Super Fine, Fine and Normal.
• Metering: see above.
• White balance: see above.
• Exposure: select this option to set the exposure manually in unusual lighting conditions such
as indirect indoor lighting, dark backgrounds or strong backlight. Settings from –2.0 to 2.0.
• Driver mode: select this option to turn on the self-timer and burst snapshot functions. Choose
a two-second or 10-second self-timer delay, or a three-shot burst.
• Effect: select this option to choose a special-effect tone for the photograph. Choose from
normal, B&W (black & white), sepia, negative, red, green or blue.
• Date stamp: select this option to add a date or a date and a time to your pictures.
Setup menu
1. Power on, press the Menu key then the Right key to select the Setup menu
.
2. Use the Up and Down keys to choose a sub-menu, then press OK to enter.
24

Publicité

Table des Matières
loading

Table des Matières