Connecting The System Output - dB Technologies Entertainment System Série Mode D'emploi

English

CONNECTING THE SYSTEM OUTPUT

REPEATER CONFIGURATION
To repeat the audio to a
second ES1002 system:
• Connect output connector
[4] on the first ES1002
to the CH1 input
a second system.
• Set the input type (LINE)
on the selector
[3] of the second system.
REPEATING THE OUTPUT TO A
MONITOR
To repeat the audio to a monitor:
• Connect output connector
[4] on the first ES1002 to
the input on a monitor.
• If the monitor has an
input type selector
switch, set it to
ES-1002
on
FIRST SYSTEM
switch
ES 1002
LINE.
SECOND SYSTEM
XLR
MONITOR
XLR
Cod. 420120265 REV. 1.0
33