NGM Dymanic WING Guide Rapide page 33

CONNECTIVITY
To better use the potentiality provided by the device and its operating system, you need an
active data connection; the data Connection of NGM Dynamic Wing is active when you first
power ON the phone. If it is not included into your mobile phone plan, data traffic may
cause you extra costs, so it is recommended to configure Internet connection via WiFi.
To enable data traffic on one of the SIM cards, select Settings > Mobile data I/O or
activate it from the Quick Setup buttons in notifications panel.
In Settings > SIM Management > Data connection, you can decide on which SIM activate
data connection.
Connect to the Internet using Wi-Fi®
You can connect to the WLAN using Wi-Fi option. To activate it, from the main menu
choose Settings > WiFi I/O. Please follow all warnings and indications concerning the use of
wireless devices in areas where the use of such functions is restricted (airplanes, hospitals,
etc.). Go offline mode when you have to use only the functions that do not require
Network access.
ENGLISH 33