Examples Of Programming - Abilia Gewa Andromeda REC1 Notice D'utilisation

Advanced options overview
The figure below shows the receivers different advanced settings options.
STEP 1
Enter Menu
Button P

Examples of programming

Adding or removing an external switch
Do as follows to add an external switch:
1. Press the programming button P.
2. Press the programming button for the relay, Btn1.
3. Press the external switch.
4. Done! Check the function by pressing the external switch.
Do as follows to remove an external switch:
1. Press the programming button P.
2. Press the external switch whose function is to be removed.
3. Done! Check if the external switch has been removed.
STEP 2
Select Relay
Btn1, R1
Btn2, R2
Btn3, R3
Btn4, R4
BtnP, Exit
Remove ext.switch
STEP 3
Select Function
Btn1, Mono/Bi/Public/Poly
Btn2, Max time
Btn3, Min time
Btn4, Delayed On time
BtnP, Exit
Set ext.switch
16
STEP 4
Mono/Bi/ Public/Poly
Btn1, Mono
Btn2, Bi
Btn3, Public On
Btn4, Polycode
BtnP, Exit
Max time (sec.)
Btn1, Off
Btn2, 2
Btn3, 4
Btn4, 6
BtnP, Exit
Min time (sec.)
Btn1, 0
Btn2, 1
Btn3, 5
Btn4, 30
BtnP, Exit
Delayed On time
Btn1, 0
Btn2, 2
Btn3, 4
Btn4, 6
BtnP, Exit