Product Specifications; Delivery Form; Technical Data - Ivoclar Vivadent VP5 Mode D'emploi

9. Product Specifications

9.1

Delivery form

– Vacuum pump VP5
– Operating Instructions
– Warranty Card
– Declaration of conformity
9.2

Technical data

Power supply:
Tolerated voltage fluctuations:
Power consumption:
Suction strength:
Final vacuum
(measured with a 4-liter test container):
Dimensions: 415 x 122 x 230 mm (length, width, height)
Weight:
Types of fuses:
Safety information :
The pump complies with the following directives:
– Directive 2006/42/EC on machinery
– Directive 2004/108/EC on electromagnetic compatibility
12
230 V / 50–60 Hz / 0.40 A
200 V / 50–60 Hz / 0.50 A
115 V / 50–60 Hz / 0.85 A
100 V / 50–60 Hz / 0.95 A
+/– 10%
80 W
15 l / min.
approx. 20 mbar
8.0 kg
230 V: T 1.0 A 250 V
200 V: T 1.25 A 250 V
115 V: T 2.5 A 250 V
100 V: T 2,5 A 250 V
9.3 Acceptable operating conditions
– Ambient temperature range of:
+5 °C to +40 °C (+41 °F to +104 °F)
– Acceptable height:
The pump is tested for use at altitudes of up to
– Pollution degree 2
9.4 Acceptable transportation conditions
– Ambient temperature range of:
– Maximum relative humidity:
This apparatus has been developed for use in dentistry. Setup and
operation should be carried out strictly according to the Operating
Instructions. Liability cannot be accepted for damages resulting from
misuse or failure to observe the Instructions. The user is solely
responsible for testing the apparatus for its suitability for any
purpose not explicitly stated in the Instructions. Descriptions and
data constitute no warranty of attributes.
2000 m above sea level.
Overvoltage category II
-10 °C to +55 °C (-4 °F to +131 °F)
80%