Quick Reference; Operation Resume - ALAN Electronics HP 106 Manuel D'utilisation

10 Quick reference

10.1 Operation resume

If you are now familiar with your transceiver, you can quickly use its functions making reference to this useful summary table:
FUNCTION
Switching on/off
Adjusting volume
Operating channel selection
Monitor of the communications in
progress (enabling/disabling)
Transmission
Sending the selective call #1
Sending the selective call #2
Sending the emergency selective call
Channel scanning
(enabling/disabling)
Priority channel scanning selection
VOX (enabling/disabling)
VOX sensitivity adjustment (two levels)
Scrambler (enabling/disabling)
CONTROL MODE
PWR/VOL Clockwise/counterclockwise rotation beyond
the mechanical click
PWR/VOL Clockwise/counterclockwise rotation
Channel selector Rotation on the desired channel
MON Briefly pressed
PTT Pressed from the start to the end of the mes-
sage
MON Held pressed
FUNC Held pressed
MON+FUNC Both held pressed simultaneously
MON+FUNC Turn on the radio holding the buttons pres-
sed
Channel selector Enable the scanning with the selector on the
desired channel
FUNC Turn on the radio by holding the button pressed
FUNC Briefly pressed
MON+FUNC Both simultaneously briefly pressed
This table is only a simple
RIF.
reminder. The
5.1
should be read carefully
before using the radio any-
5.2
way.
If the MON button is pressed
5.3
while the unit is powered on,
5.5
the radio enters the PRO-
GRAMMING MODE. Do not
5.6
carry out this operation,
since it is only allowed to
technical personnel provi-
6.2.b
ded with the appropriate
6.2.b
equipments. Wrong use of
6.2.c
this function could cause
7.1.a
device failures.
As already specified in each
paragraph, many of these
7.1.b
functions differ (or they are not
available) depending on the
7.2.b
programming previously car-
7.2.c
ried out. For details please
contact your dealer/radio net-
7.3
work manager.
Quick reference
manual
21