Bresser FlipMe Mode D'emploi page 20

Icon
(Flashing)
(No icon)
The radio controlled signal will be sched-
uled to receive a signal 4 times per day at
2:15:30; 3:15:30; 4:15:30; 5:15:30.
Press and hold DOWN (
seconds to force to search the radio signal.
If atomic time reception is activated, a tower
icon will start fl ashing. If reception is disa-
bled, the tower icon will disappear.
20
Atomic Time
Reception Strength
Undefi ned data
No Reception
No Reception for the
past 24 hours
Weak signal, but can
be decoded
Strong signal
▼
) button for 3
If the time signal has not been received in 8
minutes, you may set the time manually.
How to permanently stop or revive
the Radio Controlled Time
Press and hold DOWN (
seconds to activate the radio signal, a tower
icon will start fl ashing, then press and hold
▼
DOWN ( ) button for 3 seconds to stop
receiving atomic time signal and disable the
time icon permanently unless you press and
▼
hold DOWN ( ) button again for 3 seconds
to revive the atomic time reception.
HOW TO MANUALLY SET DATE AND
TIME
Roll the clock to "OFF / X" side, red indicator
will appear for 3 seconds.
▼
) button for 3