Technical Data - Ritter fontana 5 Mode D'emploi

• Fill the water jug with
around 0.7 l of water and
then top up to the 1.0 mark
on the water level indica-
tor with clear table vinegar.
Alternatively, fill the water
jug with around 0.9 l of
water and then top up to the
1.0 mark on the water level
indicator with clear vinegar
essence.
• Close the lid.
• Place the water jug on
the base and press the
"100 °C" temperature
button.
• Wait until the kettle
switches off automatically.
• Use the handle to lift the
water jug off the base and
then pour out the water/vin-
egar mixture.
• Repeat this process
3 times with only fresh
water.
Note:
You may also use commer­
cial de­scaling solutions to
de­scale the water jug. In
this case, follow the manu­
facturer's instructions on the
packaging.
ENERGY SAVING TIPS
The current consumed
to heat a litre of water
(initial temperature 20 °C)
to boiling point is around
0.107 kWh. Energy con-
sumption can be opti-
mised by only heating the
amount of water actually
required and only heating
to the actual temperature
required.
Lime-scale build-up may
affect the performance of
your appliance. To prevent
excessive lime-scale, the
remaining water must be
poured away after heating.
STORAGE
Keep the kettle out of the
reach of children.
Always store the cable
in the cord storage com-
partment provided on the
underside of the base.
DISPOSAL
At the end of its
service life this
product may not be
disposed of as part
of normal domestic waste.
It must be taken to a
dedicated collection point
for recycling electrical and
electronic devices. This is
indicated by the symbol on
the product, the operating
instructions or the
packaging.
The materials can be used
again in accordance with
their identification. The
re-use, material-sensitive
recycling or other forms of
recycling of old appliances
enables you to make a vital
contribution to protecting
our environment.
Please consult with the
disposal office at your local
authority.
REACH DIRECTIVE
See www.ritterwerk.de
SERVICE, REPAIRS AND
SPARE PARTS
Please contact your local
after-sales service for all
service, repairs and spare
parts issues.
See www.ritterwerk.de

TECHNICAL DATA

This appliance complies
with the following regula-
tions and directives:
– 2014/30/EU
– 2014/35/EU
– 1935/2004/EC
– ErP 2009/125/EC
– 2011/65/EU
The appliance thus
complies with the CE
specifications.
Mains voltage / Power
consumption:
Refer to the type label
on the underside of the
appliance.
Safety class: 1
WARRANTY
This ritter kettle comes with
a 2-year manufacturer's
warranty, calculated from
the date of purchase and
in accordance with EU
warranty directives. For
any warranty claims or for
customer service, the kettle
must always be sent to the
customer service centre in
your country.
English
13