Connecting To Bluetooth Device (Pairing) - ADE BR 1701 Mode D'emploi

Connecting to Bluetooth device (pairing)

‚ If you are prompted for a password: enter "0000".
‚ Always follow the operating instructions of
your mobile device.
‚ When pairing, do not plug the audio cable
into the AUX socket.
‚ If you have not pressed any button within
15 minutes while pairing, the speaker will
turn off to save energy.
‚ The Bluetooth transmission range is approx.
10 metres.
Establishing connection
1. Press and hold down the
sounds and the Bluetooth light flashes blue.
2. Enable the Bluetooth function on your mobile device
and start the search.
3. Select "V3-E" from the list and connect the devices.
Once the devices are connected, a short beep will sound
and the Bluetooth light stops flashing and stays blue
constantly.
Pay attention to the following:
‚ If you turn the speaker off and then on again, it will
reconnect automatically to the Bluetooth device when
the latter is nearby and the Bluetooth function is
enabled. Once the Bluetooth device has been found,
you will hear a short beep.
28
button until a melody
Bluetooth speaker BR 1701