IVT FS-02 Notice D'utilisation page 4

OPERATING INSTRUCTIONS
INTRODUCTION
Dear customer,
thank you very much for the trust you have placed in us. You acquired a remote control which is compatible with all voltage
converters of the DSW series. It provides you with the possibility to operate your DSW voltage converter easily and safely
even at installation sites which are difficult to access. Please read the instructions for use carefully and completely prior to
putting your remote control into operation.
DELIVERY CONTENT
• Remote switch
• Connection wire
• Mounting screws (4x)
• Manual
SAFETY INSTRUCTIONS
The following safety notes and hazard warnings serve not only for the protection of the device but also for the
protection of your health. Please read the following points thoroughly.
In case of property damage or personal injuries caused by improper handling or non-observance of these operating
instructions or the safety notes stated herein, the warrant/guarantee expires. We assume no liability for any
consequential damages!
General
• For safety and technical approval reasons (CE), the unauthorized conversion and/or modification of the
product is not permitted.
• The connected voltage converter provides an output of 230 V AC. Even in switched-off condition charged
capacitors may still produce 230 V AC at the output for a short time.
This device is no toy and must not be used by children!
•
Please ensure childproof operation and storage of the device at any time.
• Maintenance, installation or repair works may only be performed by an expert/qualified workshop. Use only original
spare parts for repair work. The use of any other spare parts may lead to serious damage to property and personal
injury! The interior of the device does not contain any product components which must be set or maintained by you.
• Don't leave packaging material heedlessly. It could become a hazardous toy for children!
If you detect damages, stop operating the device.
•
Bring it to a qualified workshop or dispose of it in an environmentally compatible manner.
Operation
• The product may only be operated in a dry environment. It may not get humid or wet, otherwise there is a risk of life-
threatening electrical shocks.
• The use of the product under unfavorable environmental conditions must be avoided under all circumstances.
Unfavorable environmental conditions include: ambient temperatures above 50°C,flammable gases, solvents, vapours,
dust, relative humidity in excess of 80%, and moisture.
• Keep the remote control and the connected voltage converter away from ignition sources or open fire!
Explosion hazard!
Ensure proper ventilation during the operational phase, never cover the remote control and connected devices.
•
INTENDED USE
This remote control is designed exclusively to be used with the digital sinus voltage inverter of the DSW series.
It allows you to switch the inverter on and off.
The user must ensure that the device is protected against humidity and damp. Any other use than described before may
damage this device; in addition, improper use may result in serious hazards, such as short-circuiting, fire, electrical shock
etc.The entire product must not be modified or converted and the housing must not be opened in any manner whatsoever.
GENERAL DESCRIPTION OF THE FUNCTIONS
The remote control FS-02 offers you the possibility to switch your voltage converter on and off easily and safely even at
locations which are difficult to access. The 4 m cable of the FS-02 provides a flexible range. If required, this cable may be
extended up to 10 m.
4
Remote switch FS-02