Haussmann CMT110 Manuel De L'utilisateur page 25

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
MAINTENANCE & REPAIRS
WARNING: Service, testing and repairs may only be carried out by service
!
technicians in conformity with the regulations valid in Canada.
We recommend our customer service department (repair centre).
Please hand these operating instructions to the repair centre.An overview of spare
parts can be found at the end of these operating instructions.
Only use original supplier spare parts.
CLEANING
For regular cleaning: Carry out the following steps once a week, or more often if used
frequently:
Clean the cooling air vents.
Use non-metallic tools to clean the air vents.
WARNING! To avoid accidents, switch off and remove the battery before carrying
!
out any maintain on the tool.The tool may be cleaned most effectively with
compressed dry air.Always wear safety goggles when cleaning tools with
compressed air.
Ventilation openings and switch levers must be kept clean and free of foreign matter.
Do not attempt to clean by inserting pointed objects through openings.
CAUTION! Certain cleaning agents and solvents damage plastic.Some of these are:
!
gasoline, carbon tetrachloride, chlorinated cleaning solvents, ammonia and
household detergents that contain ammonia.
STORAGE
Store the tool, instruction and accessories in a secure, dry place. In this way you will
always have all the information and parts on hand.
Never store the tool with a flat battery !
The battery should ideally be stored between 10
WARRANTY
Thank you for investing in a HAUSSMANN power tool. These products have been
made to demanding, high-quality standards and are guaranteed for domestic use
against manufacturing faults for a period of 36 months from the date of purchase.
This guarantee does not affect your statutory rights. In case of any malfunction of
your tool (failure, missing part, etc.), please contact one of our service technicians at
our toll free service line at 1-866-206-0888 from 8 AM to 6 PM, Monday to
Friday, Eastern time. RONA reserves the right to repair or replace the defective
tool, at its discretion.
Normal wear and tear, including accessory wear, is not covered under guarantee. The
product is guaranteed for 36 months if used for normal trade purposes. Any guarantee
is invalid if the product has been overloaded or subject to neglect, improper use or an
attempted repair other than by an authorized agent. Heavy-duty, daily professional or
hire usage are not guaranteed. Due to continuous product improvement, we reserve
the right to change the product specification without prior notice.
Register your product
We invite you to register your product online to make future communications easier. To
do so, simply visit our website www.haussmanntools.com.
o
o
o
o
C and 24
C (50
F and 75
F).
25

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

68125090

Table des Matières