Télécharger Imprimer la page

ALPATEC VB 02 Notice D'utilisation page 9

Publicité

Les langues disponibles

Les langues disponibles

- Do not use the appliance if it has fallen on the floor, if
there are visible signs of damage or if it has a leak.
- CAUTION: Maintain the appliance dry.
- CAUTION: Do not use the appliance near water.
- Do not use the appliance near bathtubs, showers or
swimming pools.
- Do not use the appliance with damp hands or feet, or
when barefooted.
- Do not force the power cord. Never use the power cord
to lift up, carry or unplug the appliance.
- Do not wrap the power cord around the appliance.
- Do not clip or crease the power cord.
- Check the state of the power cord. Damaged or tangled
cables increase the risk of electric shock.
- The appliance is not suitable for outdoor use.
- Supply cord should be regularly examined for signs of
damage, and if the cord is damaged, the appliance must
not be used.
- Do not use or store the appliance outdoors.
- Do not leave the appliance out in the rain or exposed
to moisture. If water gets into the appliance, this will
increase the risk of electric shock.
- Do not touch the plug with wet hands.
- Do not touch any of the appliance's moving parts while
it is operating.
Use and care:
- Fully unroll the appliance's power cable before each
use.
- Do not use the appliance if the on/off switch does not
work.
- Use the appliance handle/s, to catch it or move it.
- Do not use the appliance if it is tipped up and do not
turn it over.
- Do not turn the appliance over while it is in use or
connected to the mains.
Choose the adequate sentence/s depending of kind
of appliance. Not include if a sentence with the same
meaning was included previously
- Unplug the appliance from the mains when not in use
and before undertaking any cleaning task.
- This appliance is for household use only, not
professional, industrial use.
- This appliance should be stored out of reach of children
and/or the disabled.
- Make sure that dust, dirt or other foreign objects do not
block the fan grill on the appliance.
- Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
- Never leave the appliance connected and unattended if
is not in use. This saves energy and prolongs the life of
the appliance.
Service:
- Any misuse or failure to follow the instructions for
use renders the guarantee and the manufacturer's
liability null and void.
Installation
- Be sure to remove all packaging material from inside
the appliance.
Applicable if the user has to realize any installation
operation (for esample: asambly the grill...):
- Ensure that the fan is switched off from the supply mains
before start any installation or assembly operation.
- The appliance should be used with its base fitted.
Assembling the appliance:
- Install the five castors on the base.
- Install the body (O) into the base (R) , and use the base
lock (T) to screw on the base tightly.
- Connect motor (L) with terminals (M) well, and install
support pole into body and screw it.
- Install the rear guard (F) and the guard circle (G) on the
motor, and use guard lock (E) to fasten.
- Install the fan leaf (D) on to the motor axis, and screw
anticlockwise.
- Install decoration ring (A) on the front guard (B) and
screw it.
- Put the front guard (B) and rear guard (F) together, and
screw to fasten decorating ring.
- Pull the mist pole through into decoration ring (A)
Filling water:
- Push the water tank upward and remove the water tank.
- Unscrew the filler cap and fill with water.
- Screw the filler cap and put the water tank back in
position.
- CAUTION: The temperature of water should not be
40ºC above.
Operating the ice box:
- Turn off the appliance and pull out plug from the
electrical outlet.
- Take out water tank, and then take out the ice box from
appliance.
- Put the ice box into refrigerator for freezing
- After freezing, put the ice box on water holder make
temperature lower.
- It can be reused.
Operating aroma tray:
- Take aroma case out on the body rear shell.
- Put several drops aroma liquid into the aroma case, and
put the aroma case back in position.
- Slowly the aroma evaporates and be full of room while
the mist fan working.
Operating the remote control:
- Put 2 pcs battery AAA (1.5V) into before use, notice
plus or minus pole.
- Close the lid of the remote control
- Remove the battery if you are not using it for a long
time period.
Pour la protection de l'environnement, les piles usagées
doivent être rapportées chez votre revendeur.
English

Publicité

loading