J BIMBI Comby 4 in 1 Manuel D'utilisation page 10

with the recommended amount of cold water and connect the power plug to the wall socket again.
A new cycle should restart automatically with the indicator light turned on once the power cord is
connected to the socket.
· Use of any extension cords is not recommended as if may cause fire, electric shock or injury.
· DO NOT use the product outdoors.
· DO NOT let the cord hang over the edge of table or counter.
· DO NOT let the cord get in contact with any hot surface.
· DO NOT immerse the product in water or other liquids.
· This appliance is not intended for use by people (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person responsible for their safety.
· Children should be supervised to ensure that they do not play with the appliance.
· Ensure nothing rests on the heating element surface (the stainless-steel surface on the base) of the
unit before starting the sterilizing process.
· When in use, the sterilizer contains BOILING WATER. HOT STEAM will escape from the vent in the lid.
· Be careful when opening, as the steam can cause burns.
· NEVER open the unit when in use, as it affects the sterilization quality.
· NEVER place any items on top of the sterilizer.
· Stop the sterilizer during the cycle only when absolutely necessary, unplug the unit from the supply
line.
THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY
BEFORE CONNECTING THE STERILIZER
DO NOT plug in the appliance before checking that the voltage indicated on the rating plate is the same
as the electrical supply voltage.
Warning
The lead is fitted with a non-rewireable plug. In the event that the plug is not fit for the power sockets
in place, a suitable adaptor must be used. The adaptor must be earthed and be suitable to the type of
outlet.
BEFORE THE FIRST USE OF YOUR STERILIZER
· Unpack all parts of the sterilizer from the packaging and remove all plastic bags.
· Prior to first use, wash the lid (1), top rack (2), top tray (3), sterilizer body (4), central stem (5), bottom
rack (6) and tongs (13).
· After washing, measure 200 ml of tap water with the measuring cup (11) or a feeding bottle and pour
it on the sterilizer base unit.
· Now fix the central stem (5) to the bottom rack (6) and then place them on the sterilizer base (8), then
place the sterilizer body (4), top tray (3), top rack (2) and lid (1) in sequence as per the diagram. The
tongs (13) should be placed on the top rack (2) before closing it with the lid (1).
· Connect the power plug to the main supply.
· Press the "Start" button (12) downward and it will light up to indicate that the sterilization process
has started.
· When the cycle is completed (after approximately 8 minutes), the power indicator light will turn off
and the unit will switch off automatically.
· To avoid the risk of burns, leave the sterilizer to cool down for 2 minutes.
· The unit is still hot after 2 minutes of cooling. All parts must be handled with care to prevent burning.
· Remove the lid, racks, and trays from the sterilizer base and pour away any remaining water in the
base. Wipe all parts with a clean dry cloth.
10