General Information; Cleaning And Care - MF KULT pro Power Mode D'emploi

If you press too hard this can hamper the quality of the juice. It can also cause
the micro filter (4) to stop and can damage it.
Attention: You must always keep your hands, spoons or other objects (e.g. hair,
items of clothing, brushes and cloths) away from the filling opening (3) when the
mains plug is in the mains socket.
▪ Once you have juiced all the pieces of fruit and vegetable and no more juice is
running into the juice jug, switch the appliance off and pull out the mains plug.
Wait until the micro filter (4) stops rotating.
▪ If the motor sticks, rotates slowly or stops during operation, switch the appliance
off immediately and pull the mains plug out of the mains socket.
Remove the micro filter and clean it immediately.

General information

▪ Pineapples, beetroot, celery, cucumbers, carrots, spinach, melons, tomatoes,
pomegranates, oranges and grapes are all suitable for juicing.
▪ Very hard and/or fibrous fruit and vegetables such as sugar cane are not suitable
for use in the juicer.
▪ Fruits with a thick consistency such as bananas, papayas, avocados, figs and
mangos are not suitable for use in the juicer. To process these fruits, use a food
processor or a blender.
▪ To obtain as much juice as possible, press the stopper (1 or 2) downwards slowly
and with very little pressure.
▪ Make sure that the pulp container (5) and the catch container do not overfill,
otherwise the appliance may not work properly.

Cleaning and care

After use turn the appliance off and pull out the mains plug. Wait until the micro
filter stops rotating.
Under no circumstances should you immerse the motor base (9) in water. Simply
wipe the outside with a damp cloth. Do not use any abrasive cleaning agents.
Remove the stopper (1 or 2) and then open the safety lock (8). Remove the lid with
the filling opening (3) and carefully remove the micro filter (4). Now remove the pulp
container (5).
Clean the lid (3), pulp container (5) and micro filter (4) with a brush in warm rinsing
water. Then rinse the parts thoroughly under running water.
Make sure you do not touch the blade and always hold the micro filter by its edge.
15