Automatic Cooking; Control Panel Locking - Electrum PTL320VTCTA052017 Notice D'utilisation

•
Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press any key.
•
Egg timer function :
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings.
To stop the sound and the blinking it is enough to press any key.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The cooking
zone starts at full power during a certain time, then reduces automatically its power on the
preselected level.
•
Start-up:
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
•
Switching off the automatic cooking:
Action
Zone selection
(for example « 7 »)
Power level selection

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning
the control panel can be locked (with exception to the On/Off key [ 0/I ]).
•
Locking :
Action
Activate the hob
Hob locking
•
Unlocking :
Action
Activate the hob
In the 5 seconds after start :
Unlocking the hob
Control panel
Press key [ ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
press selection key
press key [ + ]
repress key [ + ]
press key [ - ]
Control panel
press selection key
press key [ - ] or [ + ]
Control panel
Press key [
Press [ - ] and hold down and then
press the rear selection key
Control panel
Press key [
Press [ - ] and hold down and then
press the rear selection key
]
]
33
Display
[ 0 ] or [ H ]
Timer [ 00 ] min
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] is blinking with [A]
[ 9 ] wents to [ 8 ] [ 7 ]
[ 7 ] is blinking with [A]
Display
[ 7 ] is blinking with [A]
Level selected
Display
[ 0 ] or [ H ]
[ L ]
Display
[ L ]
[ 0 ] or [ H ]