SAFETY
You must abide by certain safety precautions when using the equipment. In order to prevent injuries and damages
from occurring, you must always read through this operating manual carefully.
This manual must be kept in a safe place so that the information that it contains is always available. This operating
manual must accompany the equipment if it is transferred to somebody else.
We do not accept any liability for accidents or damage arising from ignoring this manual and the safety instructions.
The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance if these instructions
are not followed.
Indicates the presence of electric shocks.
Read through these operating instructions carefully before using the appliance. Become familiar with the functions
and method of operation. To ensure proper operation, always maintain the appliance according to the instructions.
The operating instructions and associated documents should always be kept close to the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure protection
from electric shocks, injury and fire. Read and follow all the instructions before using this power tool. Look after the
notes on safety.
Always check if your mains voltage corresponds with the value on the type plate
The machine has been double-insulated in accordance with EN60745: therefore, an earth wire is
not necessary
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted on the tools
identification plate.
USE PROPER EXTENSION CORD: Only use an approved extension cable that is suitable for the machine's power. The
cord must have a diameter of at least 1.5mm
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
Varan Motors
BCIE SARL, gruuss-strooss 28, 9991 Weiswampach, Luxembourg
2
.When the extension cable is on a reel, unroll the cable in its entirety.
T: 00352/26908036 – F: 00352/26908040
L225-A