Adjusting The Height Of The Headrest - 5DOT LINE FIX Notice D'instruction

9. a child must never be left unattended in their child restraint, in
or out of the vehicle.
10. the user shall be advised that the right items and plastic parts
of the chlid restraint must be so located and installed that
they are not liable, durin gevery day use of the vehicle, to
become trapped by a movable seat or in a door of the vehicle.
11. Keep the chlid seat away from the corrosive.
12. the manufacturer guarantee the quality of the products. But
not for the second hands product
13. Child seat should be changed when it has been subject to
violent stresses in an accident.
14. this user guide must be stored on the child seat, in the pocket
provided for the life of the child seat.
15. please read installation ma nual carefully before installation, if
any question, please call to our hot line: +34 943 833 013.
1. overvIeW
a. headrest height adjuster.
B. headrest.
C. Diagonal belt guides.
D. abdominal belt guides.
E. isoFix system connectors.
2. InstallatIon poInts WIthIn the vehIcle
lap and diagonal belt, 3-points
and IsofIx anchors (fig. a)
lap belt, 2-points (fig. b)
12

3. adjustIng the heIght of the headrest

the correct adjustment of the headrest ensures that the child is
properly fastened into the car seat.
1. pull the headrest height adjuster
accordance with the size of the child (fig. 3.1).
4. fastenIng the chIld Into the seat group 2 and 3
only for use with group 2-3 from
notIce
approx. 4 to 12 years of age (15-36 kg)
Installing the IsofIx system
1. press the unlock buttons on the isoFix system and, keeping
them held down, pull out the isoFix adapters until they are
completely open (fig. 4.1).
2. Fasten the isoFix adapters to their respective connectors on
the car seat, ensuring that they make a "click" sound when
they lock into place. the isoFix system indicator will change
from red to green, confirming that it has been properly locked
(fig. 4.2 and 4.3).
3. push the child seat against the car seat to check that the
isoFix system is fully latched, ensuring that the child seat is
completely in contact with the car seat (fig. 4.4).
uninstalling the IsofIx system
1. press the unlock buttons on the isoFix system and, keeping
them held down, pull backwards. the device will open, thereby
releasing the child seat (fig. 4.5).
(a) and move it to height in
13