Charging The Battery Pack - HealthMate Active Heat Guide D'utilisation

BATTERY STATUS INDICATOR LIGHTS
• To check the status of the battery pack, click the power button once.
• One to four lights will illuminate, showing the status of the battery charge;
four lights indicate a full charge.
• Indicator light will shut off automatically after 30 seconds.

CHARGING THE BATTERY PACK

1. Connect the micro-USB end of the USB charge cable into the "IN 5V" port
of the battery pack.
2. Plug the USB end of the charge cable into any USB charger.
3. The battery charger is fully charged when the four battery status lights are
lit and none are blinking.
BATTERY PACK AS A USB CHARGER
• The battery pack also serves as a charger for your phone, tablet, or other
USB device.
• Just plug your device into the "OUT 5V 1A" port and press power button.
USING THE FLASHLIGHT
• The battery pack contains an emergency LED flashlight. Just press the power
button for 2 seconds to turn it on.
• To shut off the flashlight, press power button for 2 seconds.
Wagan and HealthMate Products are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2017 Wagan Corporation. All Rights Reserved.
6