Product Warranty - Master PROHEAT STC PH-1600 Mode D'emploi

Introduction, Product Warranty, Features
& Specifications
Introduction
Master's ProHeat STC is the first heat gun of its kind that has the ability to sense and control
the temperature of the work surface. This is done by setting the desired target temperature
on the LCD and watching the actual work surface temperature increase until it reaches your
target temperature. The ProHeat STC is perfect for use on temperature sensitive surfaces of
all types where heat control is needed. For use with accessories traditional nozzle tempera-
ture control is required and the ProHeat STC allows the user to toggle between the surface
temperature control and nozzle temperature control modes.
Be sure to take time and familiarize yourself with the safety and operating instructions inside
this manual.

Product Warranty

Master Heat Tools are carefully tested and inspected before being shipped from the factory.
We warrant our products to be free from defects in materials and workmanship, under normal
use and service, for one year from date of purchase. In the event of a defect in materials or
workmanship we will either repair or replace, without charge at our option, any part which in
our judgement shows evidence of such defect.
Warranty does not apply to wearable items such as attachments, brushes, heating elements,
solder tips, heat tips, burners or ejectors, which require periodic replacement, nor does it
apply if the heat tool has been misused, abused, tampered with or altered.
At the end of the warranty period, Master Appliance shall be under no further obligation,
expressed or implied. Master Appliance assumes no responsibility for, and this warranty shall
not cover, any incidental or consequential damages from any defect in products or their use.
This warranty gives you specific rights. You may also have other rights which may vary from
state to state. Warranty information is included within the Instruction Manual for each product
or may be obtained by contacting Master's Customer Service Department.
Master Appliance Corp.
Attention: Repair Department
2420 18th Street
Racine, WI 53403-2381
USA
Features
Model Name
Model No.
ProHeat STC
PH-1600, PH-1615
PH-2600,PH-2615
Specifications
Model
V ac Hz
No.
PH-1600
120
PH-1615
PH-2600
230 50/60
PH-2615
www.masterappliance.com
Variable Variable
Airflow Temp.
Max Max Temperature Setting
Watt Amp
60 1426 11
1320 6.8
262-633-7791
800-558-9413 (USA)
sales@masterappliance.com
www.masterappliance.com
Temperature Control
Digital Lock
Display Controls
Surface
Mode
.11-.45 CMM
Use At-
tachments
Nozzle
Net Noise
Airflow
Wt. Emission
4-16 CFM 30 oz
<70 dB(A)
850 g
3