Technical Data - ohmex OH SLD 3260 Manuel D'utilisation

EN
• Power supply: ................................. 220-240V~ 50/60Hz
• Power: ................................................ 150W
• 5 interchangeable cone blades for slicing, grating and shredding
• Appliance dimensions (LxWxH): 245 x 167 x 293 mm
APPLIANCE DESCRIPTION (Fig. F1)
1) Motor unit
1a) Cones holder
2) Start/stop button
3) Mouth
4) Pressing device
At first use of the appliance, wash all the components, except for the
motor body (1), with warm water and a normal dish-washing detergent.
Abundantly rinse and dry the components before using them.
The blades of the cones are extremely sharp, handle the cones with
care holding them by the plastic part.
• Select the cone corresponding to the desired use.
• Position the mouth (3) on the motor unit (1) (Fig. F2) performing a ¼ turn leftwards
(Fig. F3).
• Insert the cone in the opening on the front part of the mouth (3) and rotate it clockwise.
The cone must be positioned correctly all the way to the bottom of the motor pin
(Fig. F4).
• Connect the power plug to the power socket making sure the mains power corresponds
to what is indicated on the data plate of the appliance.
30

TECHNICAL DATA

USE
5) Mincing cone (yellow)
6) Thick slicing cone (dark green)
7) Fine slicing cone (light green)
8) Coarse grating cone (red)
9) Fine grating cone (orange)
SLD 3260