König SAS-TRANS30 Mode D'emploi page 6

User instructions
1. LCD monitor
2. Mute button
3. AV button
4. CH button
5. IR control sensor
1. Press the Power button (9) to switch on the monitor.
2. Press the CH button (4) to set the correct channel.
3. Press the Menu button (7) to navigate to the sub-menus.
The following sub-menus are displayed:
• Display settings: "Bright", "Contrast", "Colour" or "Hue". Adjust the
display settings with the + (8) or – (6) button.
• "AV switched set"
Select the cameras, which will be shown subsequently in automatic
mode. Press the + or – button to switch between channels and the
Menu button to select or deselect a channel.
"√" indicates that this channel has been selected.
"o" indicates that this channel has not been selected.
• "Time switched"
Increase or decrease the time interval for automatic mode with the +
or – button.
4. Set the Auto/Manual switch (10) to "AUTO" to switch between the selected
channels automatically.
6. – button
7. Menu button
8. + button
9. Power button
10. Auto/Manual switch
6
ENGLISH