Checking The Digital Signal Strength; Labeling Channels; Labeling Video Inputs - Sansui SLED1937 Guide D'utilisation

Checking the digital
signal strength
This TV will allow you to view the digital signal
meter for digital channels.
1
Select "Channel ⇒ DTV Signal", then press
ENTER.
2
The digital signal strength screen will appear.
If necessary, adjust the direction of the antenna to
obtain the maximum signal strength.
CH DTV Signal
0
Signal Level
NOTE:
• Signal meter feature is not available for analog
channels.
• After 240 seconds, DTV Signal screen will return to
normal TV operation automatically.

Labeling channels

Channel label appear with the channel number
display each time you turn on the TV, select a
channel, or press DISPLAY.
You can choose any four characters to identify a
channel.
To create channel labels
1
Select "Channel ⇒ Ch Label", then press
ENTER.
2
Press or to select a channel you want to label,
then press .
CH
Ch Label
Channel Number
15-1
Ch Label CH-1
Label Clear >>
3
Press or repeatedly until the character you
want appears in the first space.
CH
Ch Label
Channel Number
Ch Label
Label Clear
The characters rotation as follows:
-
SPACE
50 100
or
15-1
CH-1
>>
, () @ / + = -
If the character which you desire appears, press
ENTER.
Repeat this step to enter the rest of the characters.
If you would like a blank space in the label name,
you must choose the empty space from the list of
characters.
4
Repeat steps 2-3 for other channel. You can
or
assign a label to each channel.
5
When you finish inputting the label name, press
EXIT to return to the normal screen.
To clear a Ch Label
After step 2 above, press
Clear", then press
NOTE:
• The channel labels will be reset after "Automatic
Search" on page 18.

Labeling video inputs

The Video Label feature allows you to label each
input source for your TV.
1
Select "Setup ⇒ Video Label", then press
ENTER.
2
Press or
to label.
3
Press or
input source.
Video Label
Video
Component
HDMI
PC
– / VCR / DVD / STB / Cable / Satellite / Receiver /
Game / Camcorder / PC / DVI PC / Blu-ray
or to select "Label
or ENTER.
to select an input which you want
to select the desired label for that
-
-
-
-
or
19 EN