Technical Data; Technical Characteristics; Applicable Regulations - Adam Hall STAGELIFT100 Manuel D'utilisation

1. INTRODUCTION
This instruction manual has been drafted pursuant Machinery Directive CE 2006/42/EG requisites.
The instruction manual is an integral part of the lifting tower and is to be consulted before, during and after
tower startup, likewise whenever deemed necessary, respecting the contents for each and all the parts thereof.
This is the only way to achieve the basic objectives established in the manual base such as preventing accident
risks and maximum optimisation possible for the lifting tower features. This manual has taken extreme care
regarding safety and accident prevention at work while using this produc thighlighting information of particular
interest to the user.
ATTENTION: PRIOR TO USING THE LIFTING TOWER, READ THIS MANUAL CAREFULLY
2. GENERAL DATA

2.1. TECHNICAL DATA

NAME
MODEL

TECHNICAL CHARACTERISTICS

EQUIPMENT DESCRIPTION
COMPANY
ADDRESS
4
Stagelift
Stagelift 100
Maximum height: 4 m
Minimum height: 1,66 m
Maximum load: 100 kg
Minimum load: 25 kg
Material: Steel as per DIN 2394
Open base area: 1,57 x 1,57 m
Closed base area: 0,36 x 0,36 m
Weight: 33 kg
Winch: 450 kg maximum load with automatic load retention brake
Cable: Galvanized steel under EN12385-4. Right hand ordinary lay
MaxLoad: 6390N
Tensile strength: 1960N/mm², Diameter: 3 mm, Length: 8 m
Fixation of tower sections to working height with safety pins.
Leg anchorage with safety pins.
Rustproof protection and painting protection fi nish.
Lifting tower Stagelift 100 has been designed to vertically raise
structures and lighting and sound equipment to different heights.
Tested by skilled personnel having passed all the operating,
maximum load and dimension inspections.
Adam Hall GmbH
Daimlerstrasse 9 ∙ 61267 Neu-Anspach ∙ Germany
PICTURES

2.2. APPLICABLE REGULATIONS

• DIRECTIVES CE 2006/42/EG ON MACHINERY
• BGV C1 (GUE 6.175)
• BGG 912 (GUE 66.15, GUE G-912)
• EN 12385-4:2008-06
• DIN EN 10305-3:2010-05
5