Operation - Bartscher IF-100 Mode D'emploi

5.3 Operation

•
Remove the protective film from one of the supplied adhesive sheets.
•
Place the adhesive sheet in the device behind the neon tubes (the figure above).
NOTE!
For hygienic reasons, the adhesive sheets should
be changed at regular time intervals.
•
At first connect the power cord to the socket on the
top right side of the device, then connect the power
cord to a single grounded outlet.
•
The device is equipped with 2 UVA neon tubes. The insects are attracted by
the UV light and stick to the behind-mounted adhesive sheet.
•
Never use the device in bright light, as in such conditions the efficiency of the
device is impaired.
•
In bedrooms, the insect trap should be turned on for 10 to 20 minutes before other
light sources are switched on.
- 25 -