Safety Warnings; Explanation Of Symbols - Ayce EL522010 Manuel D'utilisation

Read this manual carefully before using this product and check whether there are any damaged parts.
The product cannot be installed in case of damages.
Keep this manual for further reference.

SAFETY WARNINGS:

a) Keep this product out of reach of children and unauthorized users.
b) Unplug before any maintenance and let it cool down before any cleaning work.
c) Before first connecting the appliance ensure that the voltage indicated on the rating label corresponds with the main voltage
of your home.
d) Do not use the p roduct when it is charging; this could damage the product.
e) Do not look into the light directly.
f) If any part of the product is broken, do not use or charge it, the product must be destroyed.
g) The LED cannot be replaced.
h) Do not leave the product unattended during charging and working.
i) If the power cable is damaged, it must be replaced by the manufacturer, it's after sales service or similarly qualified pers ons
in order to avoid a hazard.
j) If the glass is broken, replace it immediately.
k)For outdoor use.
l) The light source of this luminaire can not be replaced; when the light source reaches the end of its life, the entire lumina
must be replaced.

EXPLANATION OF SYMBOLS:

Conforms to relevant European requirements for the product.
The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste.
The item should be handed in for recycling in accordance with local environmental regulations for waste disposal.
By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators
or land-fills and minimize any potential negative impact on human health and the environment.
TECHINICAL DATA:
Battery operated LED projector
Type
Rated voltage
Rated power
IP Level
Lamp
Charging time
Discharging time
Weight
CLEANING:
Turn off the power to clean the lamp and let the lamp cool down. Clean the lamp with soft cloth (if necessary slightly moistened).
Never use alcohol or a similar solvent, this could damage the lamp.
EL522010
220-240 V ~ 50 / 60 Hz
10 W
IP54
10 W LED, 4000 Kelvin, 771 Lumen
4 - 6 Hours
8 Hours (150 Lumen) / 4 Hours (350 Lumen)
2 Hours (771 Lumen)
0,62 kg
13
GB