Baninni ROADTRIP IMPERO ISOFIX BN3501 Mode D'emploi page 21

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

4.9. Adjust the child seat to different incline positions
The child seat can be adjusted 3 different positions - position 1, position 2
and position 3. If installed rearward-facing(group 0+), only the position 3 can
be used. Pull the positioning handle under the front of the seat upwards, and
then pull or push the seat forwards or backwards. Release the positioning
handle in the desired position and push until you hear a "click".
IMPORTANT: Check to make sure the child seat is securely locked in the
desired position by pulling the positioning handle.
4.10. Remove the crotch pad and buckle
klik
Voor aanpassing
Na aanpassing
Turn the harness locking
clip on their narrowest end
and thread it through the
slot under the bottom of
the seat and then through
the slot in the fabric cover.
So the crotch pad and
buckle as well as harness
straps can be removed.

Publicité

Table des Matières
loading

Produits Connexes pour Baninni ROADTRIP IMPERO ISOFIX BN3501

Table des Matières