Publicité
Analogmodule AS-i, IP20
Montageanweisung // Installation Instructions // ...
7
Parameterbits // Parameterbits // Bits de paramètres // Bit parametri // Bits
de parámetros
BWU1345 BWU1447 BWU1726
Bit P0:
1: 50 Hz filter in A/D converter active
0: 60 Hz filter in A/D converter active
Bit P1:
1: channel 2 is projected
0: channel 2 is not projected
Bit P2:
1: peripheral fault is indicated
0: peripheral fault is not indicated
BWU1345 BWU1726
Bit P3:
1: normal operating mode
0: both channels in current mode and without recognition of wire breakage
BWU1447
Bit P3
not used
BWU1412 BWU1727
Bit P0:
1: automatic mode recognition
0: parameter bits P1 and P3 define the mode of channel 1 and 2
Bit P1:
1: channel 1 as current module
0: channel 1 as voltage module
Bit P2
1: peripheral fault is indicated
0: peripheral fault is not indicated
Bit P3:
1: channel 2 as current module
0: channel 2 as voltage module
Information!
Weitere Informationen finden Sie unter http://www.bihl-wiedemann.de // Further infor-
mation find you under http://www.bihl-wiedemann.de/en.html // Veuillez trouver
d'autres infromations sous http://www.bihl-wiedemann.de/fr.html // Troverete delle
informazioni ulteriori sotto http://www.bihl-wiedemann.de/it.html // Información adicio-
nal en http://www.bihl-wiedemann.de/es.html
Subject to technical modifications; no responsibility is accepted for the accuracy of this information
12
Internet: www.bihl-wiedemann.de • Flosswoerthstr. 41 • D-68199 Mannheim
© Bihl+Wiedemann GmbH
phone: +49 621 33 996-0 • fax: +49 621 33 922 399
Publicité
