Remote Control - Saneo BFK1901R Notice D'utilisation

Pump maintenance : as core part of the cold air function, if the water
pump works in the state of no water or little water, it is easy to damage,
please pay attention to the water level in the water tank at all times.

Remote control :

POWER Button
Used to turn the air cooler ON and OFF.
SPEED Button
There are 3 fan speed settings (High/Medium/Low). Press to cycle through, until the
desired speed light is on.
WIND Button
Press to choose from normal, nature or sleep mode. The indicator light will turn on
next to your selection.
TIMER Button
Press to set up the countdown timer. Each press increases the countdown timer by
one hour up to 8 hours.
SWING Button
Press to turn the oscillation function on and off. When in Swing mode, the air will
cycle from side to side horizontally. Press again to turn off.
COLD Button
Press to turn on air humidification. Press again to turn off. Do not start the cool air
humidification function if the water level is lower than the minimum water line as it
may cause damage.
The remote control works with a CR2025 (3V) battery.