Features; Assembly - Rigid R2501 Manuel D'utilisation

FEATURES

PRODUCT SPECIFICATIONS
Size of Paper ....................................................... 1/4 Sheet
Motion ........................................................... Orbital Action
Orbit Diameter ......................................................... 1/16 in.
kNOW YOUR 1/4 SHEET SANDER
See Figure 1, page 13.
The safe use of this product requires an understanding of the
information on the product and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
DUST BAG
The dust bag features a twist-lock connection to the sander
and keeps dust to a minimum.
ERGONOMIC DESIGN
The design of the random orbit sander provides for easy
handling when operating in different positions and at dif-
ferent angles.

ASSEMBLY

UNPACkING
This product has been shipped completely assembled.
 Carefully remove the product and any accessories from
the box. Make sure that all items listed in the packing list
are included.
WARNING:
Do not use this product if it is not completely
assembled or if any parts appear to be missing
or damaged. Use of a product that is not properly
and completely assembled could result in serious
personal injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-866-539-1710 for assistance.
PACkING LIST
1/4 Sheet Sander
120-, 180-, and 220-Grit standard sandpaper
Paper Punch
Tool Bag
Operator's Manual
No Load Speed .............................................. 14,000 r/min.
Input .................................. 120 Volts, AC, 60 Hz, 2.4 Amps
Net Weight ................................................................3.5 lbs.
ON-BOARD VACUUM ADAPTOR
The built-in vacuum adaptor allows you to connect to a
1-1/4 in. or 2-1/4 in. diameter vacuum hose to help keep
the work area clean.
SANDING PAD
Accepts standard paper and PSA
Adhesive) paper.
PAPER PUNCH
A paper punch template is supplied with the sander for
aligning and punching holes in sandpaper.
EASY-LOAD PAPER CLAMP SYSTEM
Quickly clamps paper tightly and securely.
SWITCH
This tool is equipped with a simple switch control.
WARNING:
If any parts are damaged or missing do not operate
this product until the parts are replaced. Use of
this product with damaged or missing parts could
result in serious personal injury.
WARNING:
Do not connect to power supply until assembly
is complete. Failure to comply could result in
accidental starting and possible serious personal
injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this
product. Any such alteration or modification is
misuse and could result in a hazardous condition
leading to possible serious personal injury.
7 - English
(Pressure Sensitive