Table Des Matières; Specifications - Hach POLYMETRON 8544 Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Table of contents

Specifications

Specifications are subject to change without notice.
Specification
Operating temperature
Storage temperature
Relative humidity
Altitude
Power requirements
CE compliance
Warranty
Table 2 Specifications-Air or water electrode cleaning system
Specification
Dimensions (W x H x D) 55 x 100 x 40 mm (9.8 x 13.8 x 5.9 in.)
Weight
Cleaning system
Environmental rating
Materials
Table 3 Specifications-Chemical electrode cleaning system
Specification
Dimensions (W x H x D) 250 x 350 x 150 mm (9.8 x 13.8 x 5.9 in.)
Weight
Cleaning system
Suction height
Table 1 General specifications
Details
-10 to 50 °C (14 to 122 °F)
-5 to 40 °C (23 to 104 °F)
20 to 80%, non-condensing
2000 m (6562 ft) maximum
2
2
24 VAC, 110-240 VAC, 50-60 Hz, 10 VA
EN61326-1: EMC Directive
EN61010-1: LVD Directive
1 year (EU: 2 years)
Details
Approximately 0.4 kg (9.9 lbs)
Pressure: 0.5 to 10 bars (7.25 to 145 psi); temperature 70 °C (158 °F) maximum; flow:
400 to 4000 L/h
IP 65
Enclosure material: Brass (MS); seal material: Fluoroelastomer (FKM), etylene
propylene diene monomer rubber (EPDM) and nitrile rubber (NBR); tubing:
Polyethylene (PE)
Details
Approximately 4.5 kg (9.9 lbs)
Chemical reagent: air supply pressure 4 to 8 bar (58 to 116 psi); volume of reagent
supplied in each cycle: ± 10 mL
2 m (6.5 ft) maximum
on page 16
English 3

Publicité

Table des Matières
loading

Table des Matières