Cleaning The Bf55; Cleaning Instructions; Descaling Instructions; Cleaning Air Filter - Alecto BF55 Mode D'emploi

1. Set up the trays to suit your need. The BF55 modular design can be set up in one of three ways.
2. Make sure the bottom plate is firmly placed in the bottle tray. Dot not use the bottle tray without the bottom
plate.
Accessories only
3. Place the bottles and accessories inside the trays.
- Place baby bottles and long object in the bottle tray
- Place accessories, theethers, spoons etc in the accessories tray
5.

CLEANING THE BF55

5.1 CLEANING INSTRUCTIONS

- Always make sure bottles and accessories are rinsed before using the BF55
- Always allow the product to cool down after each use, pour any remaining water out of the water
basin and wipe dry.
- Use a clean damp cloth to clean the BF55 exterior, bottle tray and accessories tray.

5.2 DESCALING INSTRUCTIONS

To keep the BF55 in the best operating condition it is advised to descale the product regularly.
1. Pour 40ml of cleaning vinegar mixed with 80ml of clean water into the water basin.
2. Let the vinegar mixture sit for 30 minutes before emptying the basin. Wipe the remaining mixture
off the water basin
3. Add 120ml of clean water and run the sterilize program without any products in the trays to
remove any remaining descaling mixture.

5.3 CLEANING AIR FILTER

To maintain clean drying air, the BF55 is equipped with an air filter. This filter must be cleaned once a
month to maintain good working condition.
1. Make sure the BF55 is unplugged and there is no water in the basin.
2. Flip the BF55 upside down
3. Remove the air intake lid by sliding the lid away from the product.
12
Bottles only
HOT STEAM OUTLET WHILE IN OPERATION
Bottles +
Accessories
!CAUTION!