Hdmi™ V1.3 Switcher 4 To - Velleman VASH1 Notice D'emploi

1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm the
environment.
Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a specialized
company for recycling.
This device should be returned to your distributor or to a local recycling service.
Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! The VASH1 HDMI™ switcher allows access to multiple HDMI™ devices, such as Sony
PS3, HD DVD, Blu-ray™ DVD players, DVB-T and DVB-S receivers to one HD-TV display. Please read the manual
thoroughly before bringing this device into service. If the device was damaged in transit, don't install or use it and contact your
dealer. The VASH1 comes with: 1 x HDMI™ switcher, 1 x remote control, 1 x 9VDC PSU and this manual.
2. Features
• supports HDMI™ 1.1, 1.2, 1.3
• intelligent adaptive channel equalisation supporting long HDMI™ cables
• remote control
• allows easy switching between multiple HDMI™ sources via remote control or switch button on the unit
• individual LED indication for the active source channel
• 480i/480p/720p/1080i/1080p resolution
• maintains the highest HDMI™ resolution via a single link
• HDCP 1.1 compliant
• plug-and-play: no software needed, installs in seconds
3. Installation
1. Use standard HDMI™ cables to connect the video source output to the input of the VASH1. Make sure to turn off all
devices prior connecting.
2. Connect the PSU to the VASH1. Plug the PSU into the mains.
3. Turn on the display first and then all the video sources.
4. Use the remote control or push the button to switch channels.
VASH1
VASH1 – HDMI™ V1.3 SWITCHER 4 TO 1
3 VELLEMAN