Twin-Star DFS-550-0 Instructions D'installation Et D'utilisation page 5

OPERATING INSTRUCTIONS
TO ACCESS CONTROL PANEL - Open the door to access the control panel.
- POWER
The Power switch supplies power to all of the functions of the fireplace and will illuminate the flame
effect. This switch must be lit for any of the functions to work.
- HEAT
Your fireplace consists of a fan-forced wire element type heater. The HEATER switch turns the heater
ON and OFF. This switch must be lit for the heater function to work.
- TEMPERATURE
The Temperature control knob helps regulate the ambient temperature level. The further the knob is
rotated clockwise, the higher the set point temperature. Turning the knob counter-clockwise will lower
the set point temperature.
( + - ) - BRIGHTNESS
The Flame Brightness control knob adjusts the flame brightness. Turning the knob to the left
(counter-clockwise ) dims the flame effect. Turning the knob to the right brightens the flame effect.
WARNING: Turn the power off when servicing this appliance. First turn the main power switch
to the "OFF" position. Then remove the electrical plug from the wall outlet.
Model #: DFS-550-0
Fig. 3
E-4