Included Parts; Installation Procedure - Toto Connelly TS221P Manuel D'installation Et D'utilisation

Check to make sure that all these parts were included in your packaging:
Handle Assembly
Screw and
Lock Washer
1. Confirm that the valve has been installed properly and pull the plaster
guard outwards to remove.
N OTE: The finished wall surface should be between the min and max
markings on the plaster guard. See the TSPTM installation manual for further
information.
2. Hold the escutcheon against the wall with the TOTO logo at the bottom.
Secure the collar and escutcheon by tightening the two screws into the
valve.

INCLUDED PARTS

Escutcheon
Adapter

INSTALLATION PROCEDURE

Screws (2)
Long Screws (2)
Collar
3
Collar
Set Screw and
Hex Wrench
Escutcheon*