Safety Instructions - SX Lighting ST 1000 PC Manuel D'utilisation

1. SAFETY INSTRUCTIONS

Please read the instructions carefully which includes important information about the installation,
operation and maintenance.
Please keep this User Manual for future consultation. If you sell the fixture to another user, be sure that they
also receive this instruction booklet.
Unpack and check carefully there is no transportation damage before using the fixture.
Before operating, ensure that the voltage and frequency of power supply match the power requirements of
the fixture.
It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
Disconnect main power before servicing and maintenance.
Use included brackets when fixes this fixture.
Maximum ambient temperature is Ta : 40°. Don't operate it where the temperature is higher than this.
In the event of serious operating problem, stop using the fixture immediately. Never try to repair the fixture
by yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the
nearest authorized technical assistance center. Always use the same type spare parts.
Do not touch any wire during operation and there might be a hazard of electric shock.
To prevent or reduce the risk of electrical shock or fire, do not expose the fixture to rain or moisture.
Do not look directly at the light beam while the fixture is on.
There are no user serviceable parts inside the fixture. Do not open the housing or attempt any repairs by
yourself. In the unlikely event your fixture may require service, please contact your nearest dealer.
Do not cover the lamp!
The lamp shall be changed if it has become damaged or thermally deformed.