Tapp Tapplock one+ Manuel De L'utilisateur page 11

Morse code Mode
Morse code is a backup access mode. It allows you to
unlock your device using long / short combinations by
pressing the power button. Morse code gives you
access to your Tapplock without your fingerprint or
your phone.
Follow the on-screen instruction in the Tapplock app to
set up your custom Morse code.The status indicator
will be for a long hold. The status indicator will
white
be for a short hold.
blue
Press the power button three (3) times to enter Morse
code mode. The status indicator light will be purple.
If you are having trouble getting to Morse code mode,
hold down the power button until the status indicator
light turns off, putting your lock in sleep mode. Then
press the power button three (3) times until the status
indicator light turns purple.
11