6A- Network Configuration From; Android Devices - Olimpia splendid B1016 Manuel De L'utilisateur

6a- Network configuration from

Android devices:

1 - Make sure that the Android device is connected
to the Wi-Fi network the user wants to use.
If another Wi-Fi network disturbs the configura-
tion process, it is necessary to remove it from
your device.
2 - Disconnect the power cord from the air condi-
tioner.
3 - Reconnect the power cord to the air conditioner,
then press the "led" button on the remote control
seven times within 3 minutes.
4 - When the air conditioner display shows the
writing "AP", it means that it has entered "AP"
mode (Access Point).
For some air conditioner mod-
els, it is not necessary to perform
phase "2" of the configuration.
EN - 12