Walter LINE-MATE III Guide De L'utilisateur page 10

BLENDEX™ Drum Belts
These surface conditioning drum belts will quickly clean, refine and
condition large metal surfaces. They will produce a wide range of finishes
such as polishing, buffing, matching mill satin, burnishing and also
eliminating scratches.
They produce a consistent and uniform brushed finish on stainless steel,
steel, aluminum and other non-ferrous metals.
Width Length Grit/Color
3 1/2" 15 1/2" Coarse - Tan
3 1/2" 15 1/2" Medium - Maroon
3 1/2" 15 1/2" Fine - Blue
3 1/2" 15 1/2" Super Fine - Grey
5 3/8" 11 5/8" Coarse - Tan
5 3/8" 11 5/8" Medium - Maroon
5 3/8" 11 5/8" Fine - Blue
5 3/8" 11 5/8" Super Fine - Grey
COOLCUT™ Flap Drums
These drums are recommended where light metal removal and graining is
required. They remove light casting/forging lines, small weld seams and
are excellent for components with contours. They are as effective as the
first step of the final finishing process.
Dia. Width Arbor
4 1/4" 2" 5/8"-11
4 1/4" 2" 5/8"-11
4 1/4" 2" 5/8"-11
4 1/4" 2" 5/8"-11
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11
Order No.
07-H 362
07-H 363
07-H 364
07-H 365
07-H 502
07-H 503
07-H 504
07-H 505
Grit Order No.
40 07-J 424
60 07-J 426
80 07-J 428
120 07-J 432
40 07-J 444
60 07-J 446
80 07-J 448
120 07-J 452
14
TWO-IN-ONE™ Drums
These drums combine 2 finishing steps into 1. Primarily designed for fine
finishing, they produce consistent results on both ferrous and non-ferrous
metals. The coated abrasive cloth cuts aggressively while the interleaved
BLENDEX™ flaps give the surface a satin finish.
Dia. Width Arbor
4 1/4" 2" 5/8"-11
4 1/4" 4" 5/8"-11
BLENDEX™ Drums
These drums are designed to produce a wide range of decorative finishes
used for polishing, burnishing light blending and deburring, removing
shallow scratches and brightening. These non-woven flaps conform to flat
or curved work pieces giving consistent quality finishes, suitable for use on
all ferrous and non-ferrous metals.
Dia. Width Arbor
4 1/4" 2" 5/8"-11
4 1/4" 2" 5/8"-11
4 1/4" 2" 5/8"-11
3 1/2" 2" 5/8"-11 Super Fine
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11
4 1/4" 4" 5/8"-11 Super Fine
FX™ Drums
Designed for tough cleaning applications, these drums will strip paint with
ease, remove rust and scale, and clean-up a variety of surfaces. The open
web-like construction assures cool operations that resist loading for greater
productivity. These drums can replace wire brushes and sand blasting
operations.
Dia. Width Arbor
4 1/4" 2" 5/8"-11
4 1/4" 4" 5/8"-11
Grit Order No.
80 07-K 422
80 07-K 442
Grit Order No.
Coarse 07-M 422
Medium 07-M- 423
Fine 07-M 424
07-M 425
Coarse 07-M 442
Medium 07-M 443
Fine 07-M 444
07-M 445
Grit Order No.
Coarse 07-L 420
Coarse 07-L 440
15