Input Voltage; Charging Current - Ansmann Energy DIGISPEED 4 Manuel D'utilisation

same time, as the charging process starts individually. A certain amount of
heating of the batteries during charging is normal. Note the fan will turn
off and on and off during charging.
ENVIRONMENT
Rechargeable batteries are not to be disposed of in domestic waste. Return
used batteries to your dealer or even better to a battery collection point.
MAINTENANCE AND CLEANING
To maintain and clean the unit disconnect it from the mains. Only use a
dry cloth for cleaning.
SPECIFICATION

Input voltage:

5707033/EU; 5707033/UK:
5707033/US:

Charging current:

Mignon AA
Micro AAA
For best charging results it is recommended to use this charger with
ANSMANN rechargeable batteries!
ATTENTION !
With this charger only fast rechargeable batteries, which are
designed to accept the very high charging currents used with this charger,
may be inserted.
Inferior batteries could cause destruction of rechargeable batteries and the
charger, if the cells used are not suitable for fast charging.
If unsuitable cells are inserted into this charger, warranty claims cannot be
accepted and the warranty will become void.
NiMH: 1750 mA
NiMH: 750 mA
230V AC or 12-18VDC;
120V AC / 60Hz or 12-18V DC
NiCd: 700 mA
NiCd: 300 mA