Publicité
Les langues disponibles
Les langues disponibles
INSERT/REMOVE
IMPORTANT
Remove non-Brydge screen protectors before attaching your Brydge keyboard. This will
ensure a perfect fit and eliminate unnecessary pressure to your screen when inserted
into the hinges.
TO INSERT: Place your Brydge on a flat surface and set the hinges upright to 90 degrees.
Insert your iPad into the hinges with the home button on the right, one side at a time.
If your iPad is loose, remove it and gently squeeze the hinges. Repeat this process until
your iPad is held firmly.
TO REMOVE: Ensure your Brydge is on a flat surface.
Place your hand towards the back of the keyboard and pull up, one side at a time.
POWER
TO TURN ON: Press the power key for one second until the LED flashes green.
TO TURN OFF: Press and hold the power key for three seconds until the LED flashes red.
NOTE: To conserve battery, your Brydge will enter sleep mode after 20 minutes of
non-use. Press any key to turn back on. Your Brydge will enter sleep mode when both
devices are closed like a laptop.
PAIR
TO PAIR: Press and hold the Bluetooth key for three seconds until the LED flashes blue.
On your iPad, under Settings > Bluetooth select Brydge 10.5.
When successfully paired, the blue LED will turn off.
CHARGE
TO CHECK BATTERY LIFE: Press and hold the battery key until the LED flashes three
times.
The color of the flash indicates the battery level.
NOTE: If battery life is below 15%, backlit key functionality will be disabled to conserve
battery.
TO CHARGE: Insert the charging cable into the keyboard and plug the other end into a
power source. A solid red LED indicates the Brydge is charging.
When the keyboard is fully charged, the red LED will turn off. A full charge can take up
to three hours.
KEYBOARD SHORTCUTS
Copy
Paste
Command + C
Command + V
Home Screen
Switch App
Command + H
Command + Tab
Switch Language
Ctrl + Shift + Spacebar (Spacebar allows you to toggle through available languages)
WARRANTY
Thank you for purchasing a Brydge product. This product comes with a 1-year limited hardware warranty on the terms and conditions
set out in this document and at www.brydge.com/warranty. All Brydge warranties are non-transferrable and are only available to the
original end-user of the product. Warranties do not apply to products purchased from online vendors unauthorized to sell Brydge-
branded product. If a defect arises during the warranty period, cease using the product and contact Brydge. To obtain warranty
service, visit www.brydge.com/support or call +1 (435) 604-0481. Brydge, at its sole discretion and option, will (1) repair the product at
no charge using new parts or parts that are equivalent to new in performance and reliability, or (2) replace or exchange the product
with a product of equivalent functionality and value. Brydge offers free return shipping on any approved warranty claims. A shipping
label will be provided to you if you are within the United States. If you are outside the United States, Brydge will reimburse your return
shipping to a maximum of US$15.00 after providing a copy of the shipping receipt.
Australia Only: Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to
a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a
major failure.
Brydge Technologies LLC | 1912 Sidewinder Dr., Suite 104, Park City, UT 84060 USA
HAVE A QUESTION? Visit www.brydge.com/support
Cut
Command + X
Show Dock
Command + Option + D
Settings
On
75-100%
Underline
Italic
Command + U
Command + I
Search
Undo
Command + Space
Command + Z
10.5
Connected
25-74%
10-24%
Publicité
