Publicité
Les langues disponibles
Les langues disponibles
Installation
i. Float Valve Kit
1
1 Take off the nut from the adjustable oat, put the universal holder
through the threaded portion, and x the holder with the nut.
2
2 Screw the quick connect tting into the adjustable oat.
ii. Smart ATO RO
3
3. Mount the green sensor at the low water level (with the top sensor
indicating the low water level) on the reservoir with the magnet.
4
4.
Mount the blue sensor at the normal water level (with the lower
sensor indicating the normal water level) on the reservoir with
the magnet.
5
5.
Connect the RO solenoid valve with the RO/DI system as the
installation diagram shows.
6
6.
Connect the RO tubing with the quick connect tting of the oat
valve kit, and then x it on the reservoir.
7
7.
Connect both of the RO solenoid valve and power adapter with
the controller, and then connect power.
*Please avoid setting up the sensor in an area with micro bubbles
or direct light.
2
1
*
3
English
*
Publicité
