Super SOCO TS Manuel D'utilisation page 4

DESCRIPTION OF COMPONENTS AND PARTS
DIAGRAM OF INSTRUMENT PANEL
RANGE Remaining distance per charge. RPM Current riding distance.
TRIP Current rotating speed.
TURN ON SWITCHING ADJUSTMENT MODE
1. Press the high beam switch for 3 times
(i.e., the high beam indicator flashes for 3 times) in continuous time such as 4 seconds;
2. At this time, the current display mode
(driving range/ single mileage/ revolving speed) is flashing, indicating that the motor
has entered the adjustment mode;
DISPLAY SWITCHING (DRIVING RANGE / SINGLE MILEAGE / REVOLVING SPEED)
Turn on switching adjustment mode, and turn on or off the high beam switch to toggle
the display mode (driving range / single mileage / revolving speed) once.
Cycle the switching in this way.
SWITCH THE DISPLAY UNIT (KM AND MILE, KM/H AND MPH)
Retract the side stand, and enable the switching adjustment mode. Toggle the "parking
brake handle switch" from OFF (P gear indicator on) to ON (in 2 seconds), and then to
OFF, thus switching the display units (km and mile, km/h and mph); toggle the "parking
brake handle witch" from OFF to ON (in more than 2 seconds), and then to OFF, thus
turning on the LCD backlight. (Remarks: now the brightness is fixed at the brightest level).
4
Speed / fault code
Display current speed When
fault indicator goes on, fault
code will be displayed.
Ambient temperature
Display current
ambient temperature
Clock
Display current time
Total mileage
Display the total mileage.
Controller temperature
Display the temperature under
current operating conditions.
Economical Gear, corresponding to number "1"
Cruising Gear, corresponding to the number "2"
Sport Gear, corresponding to the number "3"
Fault
High beam indicator, indicating high beam on.
Parking indicator, indicating the parking state.
Winker indicator, flashing in synchronization with the
left and right winker.
The charge indicating lamp lights up when less than
ten electricity remains.
The start indicator lights up when the motor
can be started.
Real-time current
Display current output current.
Power display bar
Display current battery level
Power display
Display current battery level.
Gear display
Display current gear
Distance per charge/
trip distance/
rotating speed
Charging Data connection