CHI 11572 Manuel D'utilisation Et D'entretien page 9

How to Use
Multiple Steaming Sessions
1. Remove Water Reservoir from Garment
Steamer. Remove cap and fill with COLD tap
water. Fill to MAX fill line. Do not fill above the
MAX fill line or below the MIN fill line. Replace
cap on Water Reservoir. Do not add water
directly to Reservoir Holder.
2. Turn Water Reservoir so the cap side is facing
down, and insert into Reservoir Holder.
3. Place first garment on a plastic hanger and hang
on Garment Holder. Clothes should not touch
bottom of Garment Steamer. Long dresses
and pants should be folded over the bar of the
hanger. Holding the lower Zipper Tab, zip the
Garment Bag closed. Plug into outlet.
4. Press ON/OFF ( ) Button to begin steaming. The
Power Indicator will illuminate when steamer
is on. Follow Steaming Chart on page 10 for
recommended steaming times. Press
ON/OFF ( ) Button to stop steaming.
5. Unzip Garment Bag by holding the top Zipper
Tab. Check garment for wrinkles. If more
steaming time is needed, zip up Garment Bag.
Press ON/OFF ( ) Button to continue steaming.
When finished, press ON/OFF ( ) Button to stop
steaming. Remove garment and wipe Garment
Bag with towel.
6. Place another garment in Garment Bag. Zip
closed. Press ON/OFF ( ) Button to begin
steaming.
9