Maintenance; General Maintenance; Warning - RIDGID R860902 Manuel D'utilisation

OPERATION
The vacuum attachments are designed for the following
applications:
 The floor nozzle is used to vacuum large flat dry surfaces.

MAINTENANCE

This product contains no serviceable parts.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use. Use
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating oils, etc.,
come in contact with plastic parts. Chemicals can
damage, weaken or destroy plastic which could
result in serious personal injury.
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
This product has a 90-Day Satisfaction Guarantee Policy,
NOTE: ILLUSTRATIONS BEGIN ON PAGE 7
as well as a Three-year Limited Warranty.
For Warranty and Policy details, please go to
www.RIDGID.com or call (toll free) 1-866-539-1710.
 The extension tube is used as an extension to any of the
attachments.
 The crevice nozzle is used to vacuum narrow, hard to
reach places.
CLEANING/REPLACING THE FILTER
See Figure 5-6, page 8.
Clean the air filter assembly periodically to maintain best
performance of the vacuum. If you notice a reduction in
suction power or a change in the sound of the unit during
use, the air filter assembly should also be cleaned.
To clean the air filter assembly:
 Remove the battery pack.
 Remove the dust bowl.
 Remove the pre-filter screen from the body of the vacuum.
Twist counterclockwise to release it from the housing
slots.
 Remove the air filter by pulling it straight off the filter
frame.
 Shake or lightly brush any dust off both the screen and
the filter. Rinse if necessary.
 Empty the dust bowl; rinse if necessary.
 Once the filter and screen are completely dry, place the
filter back into place.
 Insert the pre-filter screen over the filter in the housing.
Turn clockwise to secure it in the notches.
NOTE: Make sure the tab on top of the pre-screen filter
seats in the opening in the vacuum housing. The air filter
assembly must be correctly in place for the vacuum to
operate.
 Reinstall dust bowl.
6 — English