Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
If overheating occurs, a system limits the temperature inside the heater will
automatically shut off the power supply to reduce the risk of fire.
Turn off the unit, unplug the unit from the AC outlet, and allow it to cool for at least
10 minutes. Then reconnect the plug to the power outlet and turn on the power
again.
Note: The display shows the temperature of the area around the product (diagrams
below). There may be a difference in the indication of temperature, between the
heating zone and the room. This difference is reduced during continuous operation
of the heater.
Note: The temperature display will not reflect the precise ambient temperature until
the heater has been running for at least 30 minutes.
The heating system has an overheating protection. Should the appliance overheat,
a temperature limiting system inside the appliance will automatically shut off the
power supply to reduce the risk of fire. The unit can restart as soon as all conditions
and temperature normal to its operation are restored. Identify the causes of this
overheating to avoid future incidents
Note: When not using the heater, please switch off the appliance and unplug it from
the wall outlet.
Remote control
1.
It works with 1 button cell battery CR2032, 3 volts. Used batteries should be
disposed safely.
To drop in collection bins to protect the environment. (please ask your dealer)
2.
Respect the polarity when inserting the battery.
3.
Your remote control will repeat the functions listed on your heater's control
panel.
GB-10
Publicité
Table des Matières
