Processor; User Interface; Inputs & Outputs; Power Supply Specifications (Absorption / Installation) - dB Technologies KL Série Manuel D'utilisation

English
Peak power:

PROCESSOR

Internal controller:
A/D D/A converter:
Limiter:

USER INTERFACE

Controls:
INPUTS & OUTPUTS
Inputs:
Outputs:
Power supply:

POWER SUPPLY SPECIFICATIONS (ABSORPTION / INSTALLATION)

Absorption at 1/8th of power in
medium use conditions (*):
Absorption at 1/3rd of power in
maximum use conditions (**):
Absorption with speaker on in
no-signal condition (idle):
Inrush current:
* NOTE FOR INSTALLER: Values refer to 1/8th of power, under average operating conditions (music programme with occasional or no
clipping). For any type of configuration we recommend to consider them as minimum sizing values.
** NOTE FOR INSTALLER: Values refer to 1/3rd of power, under heavy operating conditions (music programme with frequent clipping and
limiter activation). In case of professional installations and tours we recommend sizing according to these values.
KL SERIES
400 W (KL10) / 800 W (KL12-KL15)
28-bit/56-bit DSP
Peak, RMS, Limiter
Bluetooth® Control (level/pair), CH1/CH2 level, Master level,
Preset, Link-Mix
1 x Combo (XLR/Jack), 1 x (TRS or XLR), 1 x Bluetooth®
1x XLR link OUT
0.45 A (230 V) - 0.75 A (115 V) [KL10] /
1.1 A (230 V) - 1.7 A (115 V) [KL10] /
1.4 A (230 V) - 2.7 A (115 V) [KL12-KL15]
48 kHz
1 x VDE
22.5 W
14.07 A
Code 420120347 REV. 1.0
37