Before You Start; Packing List; Assembly; Adjusting Cutting Angle - Yamabiko PPA-AH-HD Manuel D'utilisation

Packing list

 The following parts are packed separately in the packing box.
 When you have unpacked the box, please check the parts that it contains.
 Contact your dealer if anything is missing or broken.
1. Operation shaft
2. Blade cover
3. Screwdriver

Assembly

Read the operator's manual carefully to ensure that you assemble the product correctly.
 Using a product that has been incorrectly assembled could lead to an accident or serious injury.

Adjusting cutting angle

 Never adjust cutting assembly with engine running.
 Failure to do so could lead to an injury or serious accident.

Before you start

4. L-wrench
5. Operator's manual
WARNING
Gear box / Drive shaft
1. Remove existing gear case from drive shaft, if necessary.
2. Loosen clamping bolts (A) on the cutting attachment, and re-
move location bolt (B).
3. Slide the cutting attachment onto the shaft housing until the
hole in the neck of the cutting attachment is aligned with the
hole in the housing (C).
4. Insert location bolt (B) into hole and tighten to snug.
5. Tighten bolts (A), clamping the cutting attachment onto the
housing.
DANGER
9
Before you start